A complete range of products for each application
|
ULTRA PLAST for polyolefin (PE and PP), PVC, POM, EVA, PS, TPE, TPU, EVOH |
|
|
PO-C |
Temperature: 140 – 300 °C. Different grades according to your specific requirements: PO-C、QUALIPURGE PO-CS and PO-S with the new developed active part for color/material change in injection (including hotrunners, can be injected into the mold). They can be used also on ABS and ASA. PO-HCS specially developed for stack molds and molds for thin wall containers and caps. PO-TPEspecially developed for elastomers, like TPE, TPO and TPU. PO-E、QUALIPURGE POE-CS and POE-S , mainly for extrusion and blow molding (EBM); they can be used also to clean only the screw on injection with particularly difficult colors (new organic pigments). |
|
PO-S |
|
|
PO-CS |
|
|
PO-HCS |
|
|
PO-TPE |
|
|
PO-E |
|
|
POE-S |
|
|
POE-CS |
|
|
ULTRA PLAST for medium temperatures: PC, PC/ABS, PS, ABS, SAN, PMMA |
|
|
HIGH |
HIGH: it can be used from 190°C to 320°C. It’s suitable for SAN, PS and ABS. HIGH-C and QUALIPURGE HIGH-CS， with the new developed active part for color/material change: both can be used from 250°C to 320°C. Suitable for screw/barrel and hotrunners (can be injected into the mold). Specially developed for PC, PC/ABS and PMMA. Their formulation avoid the “milky shadow”, a typical defect on transparent pieces after purging. QUALIPURGE PO-PS can be used between 190°C and 320°C and it’s suitable for PS, PMMA and PC. This grade too will not leave the “milky shadow” on the pieces after the cleaning. |
|
HIGH-C |
|
|
HIGH-CS |
|
|
PO-PS |
|
|
ULTRA PLAST specific for PET processing: Preforms and Cast film |
|
|
PET-C |
Temperature: 250 – 320 °C PET-C, QUALIPURGE PET-CS and PET-S with the new developed active part for screw/barrel and hotrunners (can be injected into the mold). PAC for the barrier layer in preforms and cast film. |
|
PET-S |
|
|
PET-CS |
|
|
PAC |
|
|
ULTRA PLAST for high temperature and engineering plastics. |
|
|
HT |
Suitable for PA, ABS, PBT, PEEK, PPS, PSU, PPO, GRIVORY HT, ULTEM, PEI, PES HT for temperatures from 240°C to 400°C. Suitable also for ABS and materials with flame retardant. QUALIPURGE HT-CS and HT-S with the new developed active part for screw/barrel and hotrunners (can be injected into the mold). They can be used for temperatures from 250°C to 420°C, without smell and smoke. |
|
HT-S |
|
|
HT-CS |
|
|
ULTRA PLAST all rounder purging compound |
|
|
SP |
Suitable for all the polymers processed between 140°C and 380°C. |
|
SP+ |
These two materials work with a combined chemical and mechanical action. |
|
ULTRA PLAST SP and SP+ are suitable for screw and barrel cleaning in injection machines and extruders. |
|
|
ULTRA PLAST SP+ can be used also in hotrunner cleaning (can be injected into the mold). |
|
|
ULTRA PLAST Concentrates to be mixed with your production material |
|
|
CE-E |
Temperature: 120 – 400 °C CE-E, ECO-CE, CE-CS and ECO-CE-CS: for color and material change in extrusion and extrusion blow molding. QUALIPURGE BF with the new developed active part: it has been formulated specifically to clean the blown film machines, keeping the bubble on during the cleaning. |
|
ECO-CE |
|
|
CE-CS |
|
|
ECO-CE-CS |
|
|
BF |
|
|
LTRA PLAST LP: liquid purging |
|
|
LP |
Temperature: 80 – 400 °C. |
|
This new liquid purging solution gives you one of the best result compared to the other liquid products existing on the market, without smell and smoke. |
|